You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I don't replace the lenses of they look that good. The only time I pop the bezel off is if the innards are needing help. Getting the bezel off is a challenge. Not for a beginner. You have to have patience and the right tools.Find a beat one first to try.
you have to remember those are pressed on at the factory, there are three little press marks if you ever get it off you'll see, what I use I use a good size round flat punch and a small Hammer just tap it on a heavy piece of foam just tap tap tap and you finally start seeing moving but again very light tap you don't want to damage the bezel or dents in the side of them case or scratch the paint as that was in really good shape just be careful
you have to remember those are pressed on at the factory, there are three little press marks if you ever get it off you'll see, what I use I use a good size round flat punch and a small Hammer just tap it on a heavy piece of foam just tap tap tap and you finally start seeing moving but again very light tap you don't want to damage the bezel or dents in the side of them case or scratch the paint as that was in really good shape just be careful
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.