New Departure Model D Hub

[Uni-Bike Lou]

I’m working on a New Departure hub Model D and want to switch the chain wheel (sprocket).

What is the best method to do this?

Thanks

 

[MrMonark13]

I usually just swap it as an assembly with the driver.

 

[Gordon]

DIY Cog removal tool | Bicycle Restoration Tips

If someone has already documented this, I apologize. Parts needed: clutch, 1 inch grade 2 nut and one 2 3/4 inch long grade 8 bolt with nut and washer. Procedure: Weld clutch to 1 inch nut. Thread driver into clutch and fasten with the 3/8 bolt. Hand tighten. Put the assembly in a vice and apply...

thecabe.com

 

[Uni-Bike Lou]

I’ll try to make the tool. I’ll have to see if I have the clutch. Thanks

 

[fordmike65]

Removing rear hub cogs....the Rustjunkie way. | Bicycle Restoration Tips

Wanted to swap out the 9t rear cog on my girl's '40 Twinflex to a 10t for easier riding on this portly broad. I took @rustjunkie's advice and it worked like a charm. Thanks bud! If wheel/hub is out of frame: Loosen lock ring (it has a reverse thread) just a bit. Put hub or wheel into frame or...

thecabe.com