When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
new departure s&m hub bearing
- Thread starter ssum2
- Start date
#eBayPartner Most Recent BUY IT NOW Items Listed on eBay
fat tire trader
Riding a '38 Autocycle Deluxe
I checked my bearing chart and I do not have the SM listed.
I happened to have one on my desk so, I took it apart and took a picture.
There are 7 3/16" balls in each retainer. So you can just use loose 3/16" balls. You will probably need 9 for each side. Fill up the cup and remove one ball. I did not see a retainer number on my retainers. There are two different retainers on my chart that have the same size and number balls. Perhaps it is one of those. http://fattiretrading.com/bearings.html
I happened to have one on my desk so, I took it apart and took a picture.
There are 7 3/16" balls in each retainer. So you can just use loose 3/16" balls. You will probably need 9 for each side. Fill up the cup and remove one ball. I did not see a retainer number on my retainers. There are two different retainers on my chart that have the same size and number balls. Perhaps it is one of those. http://fattiretrading.com/bearings.html
I am sure your local bike shop would have bearings they wont be original but they will work I just bought some with 7 bearing in the m
ABC Services
Wore out three sets of tires already!
My listing says it is a number 5. cup id 13/16" x 7 3/16" balls.
Similar threads
