When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Phantom Spokes?

-

deepsouth

Finally riding a big boys bike
I recently acquired a 1995 reproduction hub to use on my '58 Phantom while I make a stab at rebuilding the Bendix 2 speed automatic. The spokes from the Bendix are too short. I bought a set on EBay that were supposed to be for S2 wheels. Turns out they were 11 inches long. ( guess I should have measured before I laced the wheel) as you can figure, they're too long. If anyone owns a '95 Phantom could you please let me know how long the rear spokes are. Thanks in advance.
 
Thanks for the info. Turns out the spokes I ordered (my mistake) were for an S7 wheel. I ordered a set of 10 5/8" today.
 
Thanks for the info. Turns out the spokes I ordered (my mistake) were for an S7 wheel. I ordered a set of 10 5/8" today.
THE SAME 10 5/8 INCH SPOKES WORK ON THE S-7 RIMS
FOR A THREE SPOKE CROSSOVER BUILT WHEEL!
THAT IS HOW THE S-7 WHEELS CAME FROM FACTORY!
THE OUT SIDE DIAMETER MEASURE OF THE S-7 RIMS IS WIDER THAN S-2 RIMS.
THAT IS WHY THE 2.125 TIRES DO NOT FIT THE S-7 RIMS.
 
Back
Top