Pixie Handlebar removal

Discussion in 'Tricycles, Kid's Bicycles, Riding Toys' started by Grant, Aug 12, 2017.

  1. #1 Posted Aug 12, 2017

    'Lil Knee Scuffer

    Joined:
    Mar 20, 2017
    Messages:
    16
    Likes Received:
    1
    Location:
    Sacramento Ca
    I am looking for some help in determining exactly how the handlebars are removed from a 1960's schwinn pixie. The front bolt is out that appears to hold the handlebars aligned to the fork tube. I have never taken one of these apart and do not want to force things. We are soaking in PB Blaster but want to make sure there is not another bolt or perhaps the chrome cap screws off?

    Any help would be very appreciated.

    Thanks

    Grant PART_1502552638381_IMG_20170812_0941151.jpg
     
  2. #2 Posted Aug 12, 2017

    Cruisin' on my Bluebird

    Joined:
    May 10, 2010
    Messages:
    3,282
    Likes Received:
    2,249
    Location:
    Modesto,CA. 95355
    No other bolts to remove.sometimes the bolt will leave an indentation on the stem,so try and twist the bars back and forth and they should loosen up.then work them upward.
     
    rustjunkie likes this.
  3. #3 Posted Aug 12, 2017

    'Lil Knee Scuffer

    Joined:
    Mar 20, 2017
    Messages:
    16
    Likes Received:
    1
    Location:
    Sacramento Ca
    Thank you very much!