mike cates
Cruisin' on my Bluebird
Offered are some unique Pocket Watch Holders and Pocket Watches (The cases could also be used for Stop Watches as well for a TOC racing bicycle) :
1) (Starting at top left) SUPERIOR BRAND POCKET WATCH that will fit English reproduction clip holder shown below it. $450 Pocket Watch and Reproduction Holder. I won't sell the reproduction of a original Halper brand pocket watch clip holder by itself.
2) POCKET WATCH IN CASE.4 holes in back for mounting to a bracket. English German silver.Case is 2 1/2” X 3” x 3/4” thick. Face says 8 Day so was made for the English market. Watch has a 2” diameter face and is part of the top hinged bezel case. There is a push button on the side of the case to open it to wind the watch. $675 complete unit.
3) BRONZE CASE AND POCKET WATCH. Could be mounted on a bracket made from sheet metal stock (see sketch photo) OR a brass block split clamp type bracket (see sketch photo) that could be made and soldered to the back of the case. $600 Case and $850 Case with Pocket Watch shown.
4) FLAT TOP AND BOTTOM WITH ROUNDED SIDES, Waltham brand 30 hour pocket watch with second sweep hand. Original unmarked mounting bracket. $500 complete.
5) FRENCH MADE POCKET WATCH. Has 8day movement. Has a visible open escarpment and porcelain face. $650 Pocket Watch and Reproduction Holder shown in number 1) above. I won't sell the reproduction of a original Halper brand pocket watch clip holder by itself.
6) Triangle pocket watch holder and watch is NOT FOR SALE.
7) NICKEL PLATED OVER BRASS SQUARE CASE. Case needs a handle bar mounting bracket made. $400 CASE.
8) POCKET WATCH. ADMIRAL brand with hand engraved silver face with flowers and swirls. This pocket watch will fit 7) Case above. POCKET WATCH $450 and $850 with 7) CASE.
Mike Cates, CA.
1) (Starting at top left) SUPERIOR BRAND POCKET WATCH that will fit English reproduction clip holder shown below it. $450 Pocket Watch and Reproduction Holder. I won't sell the reproduction of a original Halper brand pocket watch clip holder by itself.
2) POCKET WATCH IN CASE.4 holes in back for mounting to a bracket. English German silver.Case is 2 1/2” X 3” x 3/4” thick. Face says 8 Day so was made for the English market. Watch has a 2” diameter face and is part of the top hinged bezel case. There is a push button on the side of the case to open it to wind the watch. $675 complete unit.
3) BRONZE CASE AND POCKET WATCH. Could be mounted on a bracket made from sheet metal stock (see sketch photo) OR a brass block split clamp type bracket (see sketch photo) that could be made and soldered to the back of the case. $600 Case and $850 Case with Pocket Watch shown.
4) FLAT TOP AND BOTTOM WITH ROUNDED SIDES, Waltham brand 30 hour pocket watch with second sweep hand. Original unmarked mounting bracket. $500 complete.
5) FRENCH MADE POCKET WATCH. Has 8day movement. Has a visible open escarpment and porcelain face. $650 Pocket Watch and Reproduction Holder shown in number 1) above. I won't sell the reproduction of a original Halper brand pocket watch clip holder by itself.
6) Triangle pocket watch holder and watch is NOT FOR SALE.
7) NICKEL PLATED OVER BRASS SQUARE CASE. Case needs a handle bar mounting bracket made. $400 CASE.
8) POCKET WATCH. ADMIRAL brand with hand engraved silver face with flowers and swirls. This pocket watch will fit 7) Case above. POCKET WATCH $450 and $850 with 7) CASE.
Mike Cates, CA.
Last edited:
