Poor Man's Fender Roller

[razinhellcustomz]

You don't put spot putty on a chrome fender. right? That would just be wrong. Good idea on a painted fender. Good luck.

 

[bricycle]

.

 

[bricycle]

Carola made a new run of rollers

Cargola

 

[bricycle]

Nothing ultra-techno to be found here, but a couple radii to pound against for that fender that needs a little "attitude adjustment."​

I used a hole saw which is about as thick as a fender. The slots in the round leave clearance for the edge roll.View attachment 810000​

The blocks can be used as a set, or either one can be mounted in a vise and used with a soft hammer.View attachment 810001​

looks like you also made a small piston pin removing jig as well, just drill hole for pin to slide thru.