TR6SC
I live for the CABE
Nothing ultra-techno to be found here, but a couple radii to pound against for that fender that needs a little "attitude adjustment."
I used a hole saw which is about as thick as a fender. The slots in the round leave clearance for the edge roll.
The blocks can be used as a set, or either one can be mounted in a vise and used with a soft hammer.
I used a hole saw which is about as thick as a fender. The slots in the round leave clearance for the edge roll.
The blocks can be used as a set, or either one can be mounted in a vise and used with a soft hammer.