rear sprocket compatibility

[sprocket]

Is a skip tooth rear sprocket interchangeable with a .50 sprocket? (hub is a 2 speed, manual Bendix). Any words of wisdom would be much appreciated.......

Thanks/Bob

 

[Freqman1]

As long as you find the 1/2" sprocket that is correct for the hub they will interchange. V/r Shawn

 

[rustjunkie]

afaik the cog can't be changed on that hub, it's pressed onto the driver.

 

[bikecrazy]

I have heard that if you grind off every other tooth on the Bendix, it will work with a skip tooth. Procede with caution because I have never done this myself!

 

[sprocket]

Many thanks for the response gentlemen. I've decided to leave "well enough" alone and postpone this project...........