MaxGlide
Wore out three sets of tires already!
I clean them, hone the shells with a cylinder honer, clean the shoes, use brake grease.
Thanks for any tips.
Wayne
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Screeching Hub
- Thread starter MaxGlide
- Start date
#eBayPartner Most Recent BUY IT NOW Items Listed on eBay
I clean them, hone the shells with a cylinder honer, clean the shoes, use brake grease.
Thanks for any tips.
Wayne
MaxGlide
Wore out three sets of tires already!
They are all bikes that got off Craigslist and were not rideable soi had to do a re and re on them.
I'm wondering if it the grease I'm using or how i clean them?
I use wire wheel to remove caked on grease then soak parts in a grease remover. Then I hone the shell, wire wheel the brake shoes, use bearing grease on all parts. Only have this problem with CCM hubs. I've done Bendix, ND, musselman, Morrow the same way and all good
I'm wondering if it the grease I'm using or how i clean them?
I use wire wheel to remove caked on grease then soak parts in a grease remover. Then I hone the shell, wire wheel the brake shoes, use bearing grease on all parts. Only have this problem with CCM hubs. I've done Bendix, ND, musselman, Morrow the same way and all good
Similar threads
