When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Sprocket and crank
- Thread starter prbowden
- Start date
#eBayPartner Most Recent BUY IT NOW Items Listed on eBay
Archie Sturmer
Riding a '38 Autocycle Deluxe
Emblem Angola NY.
Note the visible offset of the drive pin, a large 2" to center of shaft.
These parts often also had oversize threads; meaning other more common parts may likely not be interchangeable.
http://thecabe.com/forum/threads/sprocket-compilation-pic-heavy.41683/
A 1919 Emblem ad; also seen in Walt Hood catalog. Emblem is sometimes confused with a Brooklyn or Buffalo NY company.
Note the visible offset of the drive pin, a large 2" to center of shaft.
These parts often also had oversize threads; meaning other more common parts may likely not be interchangeable.
http://thecabe.com/forum/threads/sprocket-compilation-pic-heavy.41683/
A 1919 Emblem ad; also seen in Walt Hood catalog. Emblem is sometimes confused with a Brooklyn or Buffalo NY company.
Last edited:
Archie Sturmer
Riding a '38 Autocycle Deluxe
I acquired a repo H-D chain ring sprocket and it appears to require a special intermediate crank, with an odd 1-5/8” or so (?) offset for the drive pin. However have not measured from a while, going by limited memory; but 2” is way bigger.
Last edited:
Similar threads
