When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Sprocket compilation PIC HEAVY

#eBayPartner    Most Recent BUY IT NOW Items Listed on eBay
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
Very helpful thread. I was able to identify most of my sprockets. Thank you!

How about these two? Similar to Wald (4 swirls), Colson, others.

IMG_20210323_142139589.jpg
 
A new old sprocket as of late. Page one, post #3-"Shelby"? The one below is from a 40-41 Shelby.
1384149

And this earlier one below. Cutout design similar to early two(three)-piece Williams. Shelby sprocket above, not sure what the one below came from.
1384150

These "Star Base" sprockets maybe started in twenties? The thinner/fancier one with chain bumps came with the early crank below.
1384151

1384205
 
Last edited:
Unknown, anyone identify ? I'm looking for one like this or a close copy that's good enough to plate.

CIMG3802.JPG
 
Last edited:
Very helpful thread. I was able to identify most of my sprockets. Thank you!

How about these two? Similar to Wald (4 swirls), Colson, others.

View attachment 1378212
The 5-swirl 1/2" pitch sprocket is similar to the Huffman 1" sprockets on post #3 (3rd picture; 22T) and post #5 (5th picture; 26T).

The 6-swirl 22-T sprocket is similar to the MW Hawthorne 26-T sprocket on post #5 (6th picture); not sure if those were used on both Snyder-built Hawthorne bicycles and CWC-built Hawthorne bicycles.
 
I believe that post #4, picture #3 is misidentified as an Emblem; but should be identified as an Excelsior Michigan City, (or a Sears Elgin built by them, as seen in one year’s catalog).

Post 4 of 10 (excerpt)View attachment 540618
3. Emblem (not)
Also, on post #32 (and #37).
Are both of the first two emblem brand or is one [or both] a different brand?View attachment 541297
1 Emblem?

View attachment 541298
2. Henderson (A&S Chicago)
 
Last edited:
some sprockets to add to the list if that is ok!
probably some have already been on here

only #8 is still not identified

1. Iver Johnson (slotted drive)
2. CWC, Cleveland Welding Co.
3. CWC, Cleveland Welding Co.
4. Westfield, seen on “Viking” badged bike; (not Emblem Angola) (double-D drive)
5. Iver Johnson (slotted drive)
6. Westfield (double-D drive)
7. Fauber (likely by GWM)
8. unknown
9. has a Shelby look (SMB, drive pin?)
10. 1930's CCM Flyer 23 tooth racing sprocket
11. CCM sprocket from unknown year
12. Raycycle 30 tooth sprocket
18. 1920's CCM Flyer 25 tooth nickeled racing sprocket ...... rare sprocket
19. 1920's CCM Flyer 23 tooth nickeled racing sprocket ...... rare sprocket
20. Raycycle 40 tooth sprocket

sprocket 1.jpg


sprocket 2.jpg


sprocket 3.jpg
 
Back
Top