Sticker removal

[RRH48]

I am usually able to remove stickers on a frame no problem but I have run into a real tough one. It’s a college registration sticker. It appears to be vinyl. Where I have been able to pick off a couple of small chips, it has not damaged the paint. Any ideas would be welcome.

 

[Jeff54]

Hair dryer should do the trick.

 

[schwinnbikebobb]

Heat would probably be my first choice. I use a heat gun but a hair dryer would work just slower. I also use a plastic replica of a single edge razor blade to save my fingernails. Harbor Freight sells them.

 

[RRH48]

Thank you, I’ll try that.

 

[RRH48]

Hair dryer and plastic razor blade did the trick.

 

[Shawn Michael]

I have never seen or used a plastic razor blade. I will need to give that a try to save my fingers.

 

[RRH48]

It worked well for me

 

[Ernbar]

I’m late to the party here, just saw this thread but yes a heat gun or hair dryer and a plastic spatula works wonders. I removed reflective tape off a 51 Shelby really easy.

 

[bikesnbuses]

I have never seen or used a plastic razor blade. I will need to give that a try to save my fingers.

I bought some..pretty cheap/pretty awesome..I think I actually got mine at Autozone
I used mine with some HOT water to delicately pick/scrape off model paint on this old $$ bubble bath bottle..