GiovanniLiCalsi
Riding a '38 Autocycle Deluxe
One cap is perfect, while the other is heavily pitted. I may need a replacement cap. Anyone have a pedal that they might part with?
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Stuck 1896 Crescent Pedal Threaded Bearing Cap
- Thread starter GiovanniLiCalsi
- Start date
#eBayPartner Most Recent BUY IT NOW Items Listed on eBay
Soak as long as possible. Liquid Wrench always does the job eventually. Clean out the slot and lightly file the slot to square off the metal.
If you have to whack always try using a BRASS drift that you can fit to the slot. Brass won't harm the part the part you are hitting. If the brass deforms just file to reshape.
Cap is rough. Might have to have a new one made but for now it has to come off. Good luck
If you have to whack always try using a BRASS drift that you can fit to the slot. Brass won't harm the part the part you are hitting. If the brass deforms just file to reshape.
Cap is rough. Might have to have a new one made but for now it has to come off. Good luck
Similar threads
