TOC crankset removal

[Barnegatbicycles]

 

[Archie Sturmer]

A member once posted a picture of a Pope crank kind of similar, same type lock ring? https://thecabe.com/forum/threads/trouble-pulling-cranksets-help.84729/page-2

 

[GTs58]

A member once posted a picture of a Pope crank kind of similar, same type lock ring? https://thecabe.com/forum/threads/trouble-pulling-cranksets-help.84729/page-2

Now isn't that an engineering marvel!

 

[2000ITR]

Hi everyone, thanks for your replies...very informative!

@Barnegatbicycles, thanks for the copy of that piece of literature. I am going to investigate further to see if that access hole is indeed what it could be...initially I thought it was for grease/oil access and the "plug" was missing.

Regards, Joe

 

[Barnegatbicycles]

Hi everyone, thanks for your replies...very informative!

@Barnegatbicycles, thanks for the copy of that piece of literature. I am going to investigate further to see if that access hole is indeed what it could be...initially I thought it was for grease/oil access and the "plug" was missing.

Regards, Joe

Let us know how you make out.

 

[2000ITR]

Hi all:

Just took a look and yes, there is a rectangular slot in the access hole! In the attached pic the shiny part within the hole is an edge of the slot...and I can tell it has been apart before based on the somewhat mangled edge of the slot. I'll see what I can do over the next couple of days.

Thanks again everyone...I'll let you know how it goes...

Joe

 

[2000ITR]

@Archie Sturmer A couple of additional pics of the patent stickers...

Regards, Joe