TOC ID Assistance Please

[SKPC]

Very cool big-tubed (seat and down) frame Brant...slack angles to boot! Know little regarding the toc stuff, but I just love the angles and geometry! Mullet wheels may add to the slack look. Columbia/Pope comes to mind. Chain ring, again is MC Excelsior or Miami with the drive pin location and could be swapped in later as you suspect. No help regarding the Frame/Fork really, but these sweetheart rings with the drive pin between the arms could have a 15/16th center opening or 1" center opening. As we know, Miami's definitely sported the 1" center hole but may have also made them in 24 or 22 tooth with the 15/16th center. This I do not know for sure but suspect so.. You could certainly measure the center opening of the ring if you ever decide to tackle that BB to inspect it.... The TOC guys here must recognize that fork and frame! TOC guys report!

 

[New Mexico Brant]

Someone must recognize that fork and frame here! TOC guys report!

Many thanks to Evan @prewarmachine . He recognized the fork as being the same as one on Mark Dalke's Ariel currently for sale. Evan acknowledged the frame however is very different. Could it be a different Illinois or Indiana maker? See the photo comparison in Post #13 below.
https://thecabe.com/forum/threads/toc-ariel-bicycle-tall.234174/

 

[New Mexico Brant]

Photocomparision:

 

[Barnegatbicycles]

Too bad someone replaced that sprocket.