What bike did you work on today?

[Mr. Monkeyarms]

Mask over the raised scallops area making sure to press it into the corners real good & solid. Use a razor/exacto to cut to remove the excess tape & leave scallops masked. Press firmly again around the edges for a good seal. Paint!

 

[Mr. Monkeyarms]

I switched a bunch of parts to a Schwinn straight bar frame that were mocked up on a Speedster frame. Speedster was a bit small so found a new home. Stripped the blue spray paint from the frame first.

QUICK EDIT: Just remembered to mention the straightbar frame was won in a raffle at an OBC swap! Fork is from a pile of free stuff.

 

[palepainter]

Working on my klunk….sectioned tank, finished soldering work on it.

 

[dnc1]

Working on wheels today.
Swapped a "new" Sturmey hub into a friend's wheel for him.
Also glued up a partially delaminated 120 year old wood clincher rim; it's French made (no markings) but in English 700B (28") size......

...I got the rim in exchange for a brake caliper, for a 'parabike'.

 

[Freqman1]

‘41 Colson Imperial. I tried to straighten this but will probably be looking for another fork. If anyone has a boys cushioner fork let me know. Thanks, Shawn

 

[ozzie]

‘41 Colson Imperial. I tried to straighten this but will probably be looking for another fork. If anyone has a boys cushioner fork let me know. Thanks, Shawn

View attachment 1679216

View attachment 1679217

View attachment 1679218

View attachment 1679219

You could try replacing the steerer tube if you can’t get another fork.

 

[Freqman1]

You could try replacing the steerer tube if you can’t get another fork.

That’s Plan “B”

 

[tacochris]

Been neglecting this bike a tad since the new arrivals so i pulled it out yesterday, it got a set of new Goodyear tread tires and tubes, a new coat of oil and a correct taillight. Time to throw it into the regular riding rotation.

 

[ozzie]

I assembled La Fugazi today and took it for a short test ride. I still have the fenders and chainguard to paint and few other parts to go on.

 

[PlasticNerd]

Got some assembling done on the ‘38 motorbike this week. Just need chain & fenders, have truss rods and a silverray. I had to paint a tank to match, looks pretty good. Any fenders out there let me know!