Whizzer Crankshaft End Spacer

[Henryford2]

Is the crankshaft end space set on a roller crank any differently than the standard bearing crank?

 

[Lynchwrench]

YUPPIE!

 

[Henryford2]

Care to share on how it's different? Thanks

 

[whizzer1]

Crankshaft end spacer IS the same for either type crankshaft, be sure to check endplay if you are changing crankshaft and use the appropriate spacer thickness . John

 

[Henryford2]

Thanks, I wasn't very clear in my original post. My intent was to ask if "setting" the endplay is done differently for a roller crank than the standard crank. If I understand you correctly it the same method using the same spacers. Thanks again