Whizzer motor question?

[Tom Hudak]

Can anyone tell me if there is a easy way to remove the cam post from the Whizzer motor case and save the aluminum plug that goes in a recess on the backside of the motor. I never removed one and any tip will be helpful. I’m assuming this shaft presses out from the backside.

 

[WES PINCHOT]

I HAVE AN ORIGINAL PLUG, SO YOU WON'T HAVE TO WORRY ABOUT
DAMAGING YOUR PLUG.
I ALSO HAVE ORIGINAL SET OF ALL OF BOB BAKERS NEWS LETTERS
THAT MIGHT BE A HELP TO YOU.
PLEASE EMAIL DIRECT IF INTERESTED?
THANKS
[email protected]

 

[Tom Hudak]

Thanks Wes but I just figured it out, I removed a spring clip that stops the shaft from going down in deeper and gave it a tap. The plug popped out undamaged. This allowed me to tap it out from the plug side. The shaft is already in my 300 motor.

 

[WES PINCHOT]

GOOD MAN!
HAVE A NICE HOLIDAY!
WES