Found WTB - Weinmann caliper for mid 50s Corvette

[bikemonkey]

I need a mid 1950's single Weinmann caliper for a 1955 Corvette, the brake model needs to be stamped just like the one in the photo. I just need the one brake caliper, no levers, etc. It can be for the front or rear, it does not matter as I just need it to replace a bent arm on the OG caliper. It must be in good condition and will need to match the other caliper's patina as closely as possible - no buffed or real shiny calipers need apply for the position .

PM's work best and immediate PayPal for the right caliper at the right price.

Thanks!

 

[KevinM]

Is there a # stamped in the arm on the backside?

 

[bikemonkey]

Is there a # stamped in the arm on the backside?

No, there is no number but I will double check in the hardest to see places just to make sure.

Thanks!

 

[KevinM]

No, there is no number but I will double check in the hardest to see places just to make sure.

Thanks!

Do you know what the reach would be for them?

Sent from my LG-TP260 using Tapatalk

 

[rennfaron]

If you wanted to just replace both and sell off the one you got so the patina matches, here you go - https://www.ebay.com/itm/Vintage-We...-Calipers-Levers-Jaguar-Corvette/264412390277

 

[KevinM]

If you wanted to just replace both and sell off the one you got so the patina matches, here you go - https://www.ebay.com/itm/Vintage-We...-Calipers-Levers-Jaguar-Corvette/264412390277

That would be the way to go.

Sent from my LG-TP260 using Tapatalk

 

[bikemonkey]

Do you know what the reach would be for them?

Sent from my LG-TP260 using Tapatalk

No numbers stamped on the arms.

 

[bikemonkey]

Thanks for all of your advice and input. I have a replacement caliper from a CABER on the way!