abe lugo
I live for the CABE
LTD run X1 Tiger siren full custom display accessory Pee Wee DX
I am updating this ad,
A friend and i are offering up kits to finish off your X1 replicas.
We are only doing 8 at this time.
There are different kit options
I'm going to be offering 8 sets of Big Adventure Replica X1 Tiger Sirens- as kits
The kit will include:
main outer siren housing , correct size as the movie bike- molded in black resin
front siren face plate- molded in black resin
Raw cast of the tiger head, it has already been resculpted to match the movie sculpt. unpainted.
clear bubble for the radar - This will also be unpainted - I used candy transparent red in the images shown.
black plate to hold radar bubble on
all appropriate decals needed on decal sheet.
A screw set for parts that need to be screwed together.
It will also include the electronics to make the radar work, including the LED light and the main switch on the siren face
It will also have the microphone handle and clip to mount to your handlebars.
The base mounting will have the aluminum plate with the same holds as the movie
The neck mounting strap will be a lightly beefed up version of the last one I did.
Again all mounting blots needed will be included.
The buyer will have to assemble the baseplate, mount the tiger head to the main housing, paint the tiger, hot glue the electronics in. also, you may want to figure out your speaker positioning. I may offer base plated with holes on the bottom as and option but that will not be screen accurate.
I added holes on the side and it is hardly noticeable.
Medium Kit for the the tiger will be 275.00 includes shipping
Cheaper raw kit at 175.00 shipped.
This would include:*
main housing
face plate
tiger unpainted
radar bubble*
rear bubble plate
Finished kit may also be available upon request. 575.00 shipped. These would need more lead time to get cleaned up and finished.
Images shown are of a finished kit. I'll post a raw pics of the parts later this week.
They will be available for shipping in about a week For the first 4 or so.
Please PM with questions and interest. I'll post a list of people who are interested here.
Below is a video of it working.
This is the old ad;
So here it is, I'm kind of seeing if there is interest in this.
This is Casting of the hard to find Tiger Super Siren, This is the exact same sized ones as what is on the Pee Wee Herman Bike in the Big Adventure Movie.
The whole thing is done that same way the movie props were made for the movie. The paint job is a bit higher quality.
There are some siren that show up on ebay but those are not the same or even correct housing or tiger.
This piece will come ready to mount to a Schwinn Stingray gooseneck. Schwinn Gooseneck is not included.
The Microphone and alarm sounds work, as does the Radar light. It has an On and off position for the LED.
The Tiger has been resculpted to match the movie tiger.
I would recommend this as more of a display pieces than a unit to have one bike that gets ridden a lot. Afterall it is still casted resin, although the bracket has an extra piece of styrene holding it inside for extra strength.
For anyone Building a Pee Wee X1, this is the main piece.
If you have any questions, comments or offers please PM me.
Don't be afraid to discuss an offer.
I'm looking to get ----tbd
[video=youtube_share;yGrS5TJ2RTU]http://youtu.be/yGrS5TJ2RTU[/video]
I am updating this ad,
A friend and i are offering up kits to finish off your X1 replicas.
We are only doing 8 at this time.
There are different kit options
I'm going to be offering 8 sets of Big Adventure Replica X1 Tiger Sirens- as kits
The kit will include:
main outer siren housing , correct size as the movie bike- molded in black resin
front siren face plate- molded in black resin
Raw cast of the tiger head, it has already been resculpted to match the movie sculpt. unpainted.
clear bubble for the radar - This will also be unpainted - I used candy transparent red in the images shown.
black plate to hold radar bubble on
all appropriate decals needed on decal sheet.
A screw set for parts that need to be screwed together.
It will also include the electronics to make the radar work, including the LED light and the main switch on the siren face
It will also have the microphone handle and clip to mount to your handlebars.
The base mounting will have the aluminum plate with the same holds as the movie
The neck mounting strap will be a lightly beefed up version of the last one I did.
Again all mounting blots needed will be included.
The buyer will have to assemble the baseplate, mount the tiger head to the main housing, paint the tiger, hot glue the electronics in. also, you may want to figure out your speaker positioning. I may offer base plated with holes on the bottom as and option but that will not be screen accurate.
I added holes on the side and it is hardly noticeable.
Medium Kit for the the tiger will be 275.00 includes shipping
Cheaper raw kit at 175.00 shipped.
This would include:*
main housing
face plate
tiger unpainted
radar bubble*
rear bubble plate
Finished kit may also be available upon request. 575.00 shipped. These would need more lead time to get cleaned up and finished.
Images shown are of a finished kit. I'll post a raw pics of the parts later this week.
They will be available for shipping in about a week For the first 4 or so.
Please PM with questions and interest. I'll post a list of people who are interested here.
Below is a video of it working.
This is the old ad;
So here it is, I'm kind of seeing if there is interest in this.
This is Casting of the hard to find Tiger Super Siren, This is the exact same sized ones as what is on the Pee Wee Herman Bike in the Big Adventure Movie.
The whole thing is done that same way the movie props were made for the movie. The paint job is a bit higher quality.
There are some siren that show up on ebay but those are not the same or even correct housing or tiger.
This piece will come ready to mount to a Schwinn Stingray gooseneck. Schwinn Gooseneck is not included.
The Microphone and alarm sounds work, as does the Radar light. It has an On and off position for the LED.
The Tiger has been resculpted to match the movie tiger.
I would recommend this as more of a display pieces than a unit to have one bike that gets ridden a lot. Afterall it is still casted resin, although the bracket has an extra piece of styrene holding it inside for extra strength.
For anyone Building a Pee Wee X1, this is the main piece.
If you have any questions, comments or offers please PM me.
Don't be afraid to discuss an offer.
I'm looking to get ----tbd
[video=youtube_share;yGrS5TJ2RTU]http://youtu.be/yGrS5TJ2RTU[/video]
Last edited: