Found Looking For Schwinn Console Handlebar Clamps.

[Wolfmac]

Nope. That doesn’t work either. Crappy repop stuff I got here.

 

[Wolfmac]

I was beginning to think the libations were interfering with my judgement

 

[Hoagie57]

well you open up the holes in the clamp enough to move it over or scrap out the clamps. I could use those clamps for a set of Parade Bars

 

[Wolfmac]

well you open up the holes in the clamp enough to move it over or scrap out the clamps. I could use those clamps for a set of Parade Bars

You got ‘em Tommy. Not gonna work for me.

 

[Wolfmac]

Just need the clamps.

 

[Wolfmac]

Any condition considered

 

[1817cent]

Sean, i had a set of those crappy repops on a rider a while back. What i did to make them fit was to redrill hole larger than the bolt. The button sits over the hole so it isnt seen, while increasing the space for the button to sit flat.

 

[GTs58]

Sean, i had a set of those crappy repops on a rider a while back. What i did to make them fit was to redrill hole larger than the bolt. The button sits over the hole so it isnt seen, while increasing the space for the button to sit flat.

I wouldn’t recommend drilling the hole out bigger. I would make what Craig Morrow calls an oval circle.

 

[Wolfmac]

I wouldn’t recommend drilling the hole out bigger. I would make what Craig Morrow calls an oval circle.

Well I already sold the clamps to a member to use for parade bars. Starting from scratch now

 

[Wolfmac]

Bump