OC_Rolling_Art
Riding my double-diamond C-Model. Yes, I said it.
Small WIRE CONDUIT For Aerocycle Taillight, 1920s-30s Teacup Lights
Wanting the correct finished look for your restoration instead of a plain wire? Here is some hard to find small wire conduit for your Aerocycle taillight, 1920s-30s Teacup Lights or some early motorcycle applications.
After searching for more than two years I was able to source the proper size wire conduit for an Aerocycle/Cycleplane rear fender, as I refused to drill out the original factory hole for the more common larger sizes available. The pattern is not exact but pretty close.
I received packages from China and all over the world hoping to find something useful, nothing but dead ends. The sellers either did not know how to properly measure what they had or just mis-represented the product.
This 70” long piece is enough to run from your Aerocycle/Cycleplane tank and under the arc of the rear fender to the taillight, or more than enough to cover two wires from an early teacup light to a battery can. The O.D. is about .159” and just fits through the fender hole. Conduit is bright stainless steel but can easily be aged a number of ways. The conduit is conductive, and can be used as a ground connection for single wire applications.
Shown for comparison is an original Aerocycle taillight (not included).
$29.00 each, shipped anywhere in the lower 48 states. Two or more at $25.00 each.
PayPal Friends and Family to mike@rainbowtoned
Thanks for looking.
Wanting the correct finished look for your restoration instead of a plain wire? Here is some hard to find small wire conduit for your Aerocycle taillight, 1920s-30s Teacup Lights or some early motorcycle applications.
After searching for more than two years I was able to source the proper size wire conduit for an Aerocycle/Cycleplane rear fender, as I refused to drill out the original factory hole for the more common larger sizes available. The pattern is not exact but pretty close.
I received packages from China and all over the world hoping to find something useful, nothing but dead ends. The sellers either did not know how to properly measure what they had or just mis-represented the product.
This 70” long piece is enough to run from your Aerocycle/Cycleplane tank and under the arc of the rear fender to the taillight, or more than enough to cover two wires from an early teacup light to a battery can. The O.D. is about .159” and just fits through the fender hole. Conduit is bright stainless steel but can easily be aged a number of ways. The conduit is conductive, and can be used as a ground connection for single wire applications.
Shown for comparison is an original Aerocycle taillight (not included).
$29.00 each, shipped anywhere in the lower 48 states. Two or more at $25.00 each.
PayPal Friends and Family to mike@rainbowtoned
Thanks for looking.
Last edited:
