How many out there need SW Floating hub races?

[fordmike65]

Make sure to vote!

 

[popawheelie]

FordMike, when you find the Machinist to create this part for the Floating Hub, please let me/us know the cost, and I'm sure some of us will still be there to put in deposits or total costs to get this going forward. Happy New Year.

 

[41compax]

Hi, Were these ever reproduced? Thanks, Lary

 

[Thurman]

I know a machinist that has reground pitted cups and cones to a smooth finish. It was not floating hubs but similar size. Don't know about the hardening but he also put in a full compliment of balls with no cage and has lots of miles on it.

 

[Kickstand3]

Put me down for 2 sets


Sent from my iPhone using Tapatalk

 

[41compax]

Make sure to vote!

I didn't mean to start anything 1 1/2 years later as I just found your post in looking through the CABE files for info on my SW Floating Hub and wondered if they were ever made and if I could still buy a set or two. Sounds like there is still interest in some repops.

 

[fordmike65]

I didn't mean to start anything 1 1/2 years later as I just found your post in looking through the CABE files for info on my SW Floating Hub and wondered if they were ever made and if I could still buy a set or two. Sounds like there is still interest in some repops.

Haven't been made yet, but thanks for reminding me guys! I'll look into it again and hope we can get this done.

 

[Barto]

And to think I almost sold my hub...

 

[kwoodyh]

Haven't been made yet, but thanks for reminding me guys! I'll look into it again and hope we can get this done.

Well @fordmike65 you know I have access to BQ ( bearing quality) steel round stock scrap so if you find a machinist to make some I can probably get you the steel for mere pennies plus shipping, let me know.


Sent from my iPhone using Tapatalk

 

[Kickstand3]

Well @fordmike65 you know I have access to BQ ( bearing quality) steel round stock scrap so if you find a machinist to make some I can probably get you the steel for mere pennies plus shipping, let me know.


Sent from my iPhone using Tapatalk

Got 3 hubs waiting!



Sent from my iPhone using Tapatalk Pro

 

[lounging]

I'm in! Please make some

2 years, 2 months, and 13 days later bump...

 

[jlively970]

Howdy @fordmike65 -- did anything ever come of this? I would totally be into a set or two of these.

Cheers,
Josh

 

[fordmike65]

Howdy @fordmike65 -- did anything ever come of this? I would totally be into a set or two of these.

Cheers,
Josh

Not yet. Still hoping a fellow Cabe member might find time in his hectic schedule to take a stab at this project.

 

[jlively970]

Not yet. Still hoping a fellow Cabe member might find time in his hectic schedule to take a stab at this project.

Amen, thanks for the reply... Does anyone have a good set that I could take to a machinist to duplicate?

 

[robert bell]

Would take 3 sets!!

 

[gorace38]

I'd be in for two sets if this happens

 

[fordmike65]

Bump for getting a step closer to making this a reality! Stay tuned....