You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Bendix Sturmey Archer Shimano 24 and 28 tooth rear sprockets
Mike just made a 1" pitch skip tooth version of these 3-tab cogs. He is sending it to me for a real time field test. He wants to make sure the Skip Tooth version is worth making as long as it mounts and runs smoothly without problems. I will come back to post it here with results after a few solid rides...pete.
Mike just made a 1" pitch skip tooth version of these 3-tab cogs. He is sending it to me for a real time field test. He wants to make sure the Skip Tooth version is worth making as long as it mounts and runs smoothly without problems. I will come back to post it here with results after a few solid rides...pete.
I have been buying these then dremmel cutting off every other tooth. Hard metal, offset for chain line adjustment, and inexpensive. Quiet as well compared to the sharp-edged Ichi with flats instead of curves interacting with the rollers & links. I had to dremel the sharp edges down on that Ichi cog to shut it up, it was really loud when new.
These thinner 1/8", or 3mm cogs when run with wide skip tooth chains will set on either the inside or outside of the wider chain roller, depending on the bikes' chain~line. I do not think it affects the chains' wear, although you can flip the chain every year to distribute wear more evenly.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.