When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Morrow hub bearing question

-

Mack the fork

Look Ma, No Hands!
For those of you who are knowledgeable on the subject of prewar Morrow hub rebuilds:

I am using parts from two separate, late 1930’s early 1940’s Morrow hubs to build one good one.

It appears that I have enough good parts to complete one good hub; except for one part

I am in need of the largest of the three bearing cages that are used in the hub. According to the Morrow factory drawings,
the hub utilizes three bearing cages: a “small” , “medium” , and “large”.

I need the “large”, as the cage is rusty, broken, and the bearings are deeply pitted.

my question is: Is the large Morrow bearing cage assembly the same part that appears in other, (non Morrow) hubs , and
interchangeable ?

Please advise.
Thanks!

1448776
 
Back
Top