When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Show your Davis built bicycles

#eBayPartner    Most Recent BUY IT NOW Items Listed on eBay
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
Driving Patric nuts....
bCxPD-1.jpg
 
Last edited:
1913 Dayton Motorcycle

In an ad for the Dayton spring fork bicycles its states "This fork is a duplicate of the spring fork used so successfully on the Dayton Motorcycle".
Thought I'd share some pictures of a friends Dayton Motorcycle he recently purchased. Its a 1913 in original condition. The leaf spring and fork are the same design as on the bicycles, (see Scott McCaskeys in earlier post) and is covered by the fender. So how does the spring "flex" without damaging the fenders? If you look close you can see where the fender is cut just in front and just behind the fork, and has hinges. How cool is that!
The bike also sports the same Dayton badge as the early bicycles.

DaytonMotorcycle006-1.jpg

DaytonMotorcycle002-1.jpg
 
In an ad for the Dayton spring fork bicycles its states "This fork is a duplicate of the spring fork used so successfully on the Dayton Motorcycle".
Thought I'd share some pictures of a friends Dayton Motorcycle he recently purchased. Its a 1913 in original condition. The leaf spring and fork are the same design as on the bicycles, (see Scott McCaskeys in earlier post) and is covered by the fender. So how does the spring "flex" without damaging the fenders? If you look close you can see where the fender is cut just in front and just behind the fork, and has hinges. How cool is that!
The bike also sports the same Dayton badge as the early bicycles.

DaytonMotorcycle006-1.jpg

DaytonMotorcycle002-1.jpg

Cool pic Don, the bike and motorcycle share the same curved truss rods also.
 
Davis built Shapleigh Hardware Company

My Davis built bike. Purchased at a garage sale in Nebraska. We use it as our camping bike. Guessing it is from mid teens.

001.jpg


002.jpg


003.jpg
 
That Rugby may be Schwinn built. Though the strike document states "Ruby" I think this is a possible typo. But anything is possible.

booksidL3ScAAAAMAAJpgRA8PA33img1zoom3hle-1.jpg
 
A new discovery has come to light, I recant any previous statements about Davis building Sears Chiefs, here us proof positive that Mead was indeed the manufacturer!
vasy8e8a-1.jpg

You know what is really ironic about this is that Mead Paper Co was founded in Dayton Ohio by Colonel Daniel Mead... James R Mead's (Buffalo Hunter, Indian Trader) first cousin.

"In 1846 Daniel Mead helped establish Ellis, Chafflin & Company, a paper company, in Dayton, Ohio. He was a part owner until 1882, when he became the sole owner and changed the name to Mead Paper Company. George H. Mead, Daniel's grandson, ran the company starting in around 1905"

So Mead was in Dayton long before the Huffman's ever showed up... just saying.
 
Back
Top